MAME 0.205 ROMs sooner (arcade + mess)

I will update the following folder for the updates  (from official 0.204 to the next official release 0.205):

https://bda.retroroms.info/downloads/mame/update/

mirror: https://mega.nz/#F!nQdjXYSJ!tT-g6WsIZQ7GBr4KPMf4Yw

Don't search/post here for stuff that is already added to 0.204 or earlier!

Note: Remember that this update folder does not contain complete sets! "Full MAME 0.204" + "update" -> rebuild -> "Full MAME 0.204rXXX"

I'm missing sfex2p (euro 990611) has this not been released yet ?

thanks its in update now so you must have been uploading to it

could you or someone upload the rom MAGIC PURPLE for mame 0.205 magipur 

Can anybody know why the download section is offline?

 No idea, though I hope that it comes back up! It keeps getting harder to find MAME stuff!

New.

 Are you asking for a fix?

Then look in the backup folder of your rom manager; those files were already in Mame 0.204

Merry Christmas everyone!

I only miss 2 roms for totlvice

mame -verifyroms totlvice

totlvice    : 93c46.7k (128 bytes) - NOT FOUND

totlvice    : 639eba01 - NOT FOUND

romset totlvice is bad

1 romsets found, 0 were OK.

Rom 93c46.7k:

expected: cc461e0629ff71c3a868882f1f67af0e19135c1a

actual: 43b40fe420ebbec73eed09f55e52c5fe1445bdc5

Rom 639eba01 for totlvice is missing

 Have you a fixDat?

 I don't have a fixDat. I don't use clrmamepro. I use advancescan.

But you can see that the 93c46.7k from totlvice.zip in mega.nz has sha1sum 43b40fe420ebbec73eed09f55e52c5fe1445bdc5

And the required rom from "mame -listroms totlvice" has sha1sum cc461e0629ff71c3a868882f1f67af0e19135c1a

And 639eba01 is missing. Although it is a "bad dump".

These are the only 2 things I have missing.

Is your romset fully validating ?

My shows only that one file missing.https://ibb.co/C8WkdSc

Fix attached.

Ho ho ho ho!!!! and  Merry christmas for all those who celebrates it.

These threads are gold. Thank you!

Also: Merry christmas to everyone from austria.

It doesn´t matter anymore my fix, i'm using mameuifx aka arcade version. A few roms doesn´t add in the system, because this builds sometimes released before and after the official mame release the genuíne build.

I already grab the roms on PD and seed them.

I don´t use official mame because i'm not interrested yet in the systems.

Thanks.

Arcade uses the same source version as the official Mame release.

The files you requested were already part of the previous Mame version; they are in the backup-folder of your rom manager.
I told you the same thing a month ago...

polystars 93c46.k has the wrong checksum. 

Stargeizer loaded this up for us.

You need only scroll 4 rows up in this tread. :)

Cheers

Yes, but not always Arcade have the same roms in the final release of mame, the reason i got roms before and after release and i lost them.  It's very frustrating. We need to do something about Arcade, because they don´t wanna wait for mame release and we get 24 hours before or later. For example AsuraX builds they release many times each day, but i'm not interrested on the official mame, because it have things i don´t wanna. In Arcade they remove even phantom roms still not worth for your computer. Next time we want a game so badly we need to wait one month.

I checked everytime crlmamepro backup folder, but there is no roms from the older version of mame, the reason people is asking for rollback roms. I can not follow the real versions anymore.

I recieve Arcade 25/12/2018 and mame was released 26/12/2018 with some new additions, that arcade doesn´t have yet, only next month. Try yourself using arcade for 2 months you will understand the reason why i can´t follow. So next time, i need to check mame 0.205 first before i get 0.206 yet.

Then compile it yourself; the instructions are on the page.
http://arcade.mameworld.info/index.html

 Great Answer, or your still continue to be stupid. I will not compile anything. If you don´t like to help users asking roms just leave already or don´t answer.

I'm stupid? Every month you place a request for roms that are already available.
I'm helping you to find the roms yourself, but apparently you don't want to learn and want to be spoon-fed like a baby.

I have filled more requests than you did.

This is my missing fix dat file...

Who can help me?

@kchinchi, are you joking? Almost all the files you request are in the Mega-folder at the top of this thread...

missing

lohtb3      : i-10.10 (65536 bytes) - NOT FOUND

lohtb3      : i-11.11 (65536 bytes) - NOT FOUND

lohtb3      : i-2.2 (65536 bytes) - NOT FOUND

lohtb3      : i-3.3 (65536 bytes) - NOT FOUND

lohtb3      : loht-a26.bin (8192 bytes) - NEEDS REDUMP

lohtb3      : i-8.8 (65536 bytes) - NOT FOUND

lohtb3      : i-7.7 (65536 bytes) - NOT FOUND

lohtb3      : i-15.15 (65536 bytes) - NOT FOUND

lohtb3      : i-14.14 (65536 bytes) - NOT FOUND

lohtb3      : i-6.6 (65536 bytes) - NOT FOUND

lohtb3      : i-5.5 (65536 bytes) - NOT FOUND

lohtb3      : i-13.13 (65536 bytes) - NOT FOUND

lohtb3      : i-12.12 (65536 bytes) - NOT FOUND

I´m missing this ROM: laser500

(The one on BDA MAME 0.205 Full seems to be incorrect).

Can someone please help me out?

Neither of those roms are in the BDA; it looks like the currentroms folder on the BDA is far from complete.

Fix attached.

 Great! This works. Thank you very much!

Here it is:

https://www27.zippyshare.com/v/RR1XqOpT/file.html

I am missing only one:

strsphnxf

Another one that isn't in the BDA.

Attached.

Am missing sente6vb.

Could someone please prove me with the rom.

https://bda.retroroms.info/downloads/mame/mame-0205-full/strsphnxf.zip >> I don't know where you are searching for roms!

and btw this is the update thread for the next 0.206 release not for the full 0.205 set !

@sharifgm: Why not downloading it ?

https://bda.retroroms.info/downloads/mame/mame-0205-full/sente6vb.zip

 Strange, I was sure I didn't see it there or in the currentroms.

This is the update thread for 0.205, though.

Hi I need help: I miss 81

I do not care about chd.

Thank you

thats the sooner update thread (0.205 to 0.206 update) and not the 0.205 full update thread ....but nobody cares except me :-(

Seems hard to open a new thread for your missings ;-)

Can anyone help complete my set?

I had a full 0.204 split set, tried updating and rebuilding as a non-merged set (easier to manage Launchbox) and now it's incomplete 

I've tried downloading the missing CHDs etc manually but they aren't being picked up in clrmamepro,

Here is your fix.

Cheers

https://www96.zippyshare.com/v/lLbhBnMt/file.html

There wasn't a need for a fix; all the requested files are in the BDA.

0 missing ROMS

0 missing CHDs

14 missing sets

Can anyone let me know what I need to do to fix this? It's driving me insane. Fix dat attached.

From there you have this datfile?

It includes no roms only emulation relevant informations.
No roms nothing to fix.

Try to fix that.

Your Dat file has this:

    <machine name="fantasy_sound" sourcefile="src/mame/audio/snk6502.cpp" isdevice="yes" runnable="no">
        <description>SNK Fantasy Sound</description>
        <device_ref name="speaker"/>
        <device_ref name="snk6502_sound"/>
        <device_ref name="samples"/>
        <device_ref name="sn76477"/>
        <device_ref name="discrete"/>
        <sample name="ft_voi-0"/>
        <sample name="ft_voi-1"/>
        <sample name="ft_voi-2"/>
        <sample name="ft_voi-3"/>
        <sample name="ft_voi-4"/>
        <sample name="ft_voi-5"/>
        <sample name="ft_voi-6"/>
        <sample name="ft_voi-7"/>
        <sample name="ft_voi-8"/>
        <sample name="ft_voi-9"/>
        <sample name="ft_voi-a"/>
        <sample name="ft_voi-b"/>
    </machine>

My Dat file has this:

    <machine name="fantasy">
        <description>fantasy</description>
        <rom name="ft_voi-0.wav" size="208428" crc="624622b2" sha1="7de4d8881b109864e38aa06afeb2ec6bdf36495c"/>
        <rom name="ft_voi-1.wav" size="188460" crc="0ed69a0d" sha1="9e812ab9c6158369d6d6b356d5ebe5c0b9893388"/>
        <rom name="ft_voi-2.wav" size="224300" crc="f153f6fc" sha1="ef67c69109acf408988987d99fddf37954e402ea"/>
        <rom name="ft_voi-3.wav" size="189484" crc="bc5144f1" sha1="d0f8dccbe1941d1d0e76e89ab85c982a4cfb58f8"/>
        <rom name="ft_voi-4.wav" size="203820" crc="07728b73" sha1="fd8de004453c41aa5eee485f503504696a2a568c"/>
        <rom name="ft_voi-5.wav" size="62508" crc="f13bc666" sha1="64fe7765e665ac4813dc3f2accc3ecdd0586359c"/>
        <rom name="ft_voi-6.wav" size="116780" crc="c61d1b88" sha1="d4d5c69592dfc9ccf5a110c40e5edcb6e11aaebd"/>
        <rom name="ft_voi-7.wav" size="50220" crc="cfbdb91e" sha1="3695de6ebac39975c29a620f1643c72ea19067ec"/>
        <rom name="ft_voi-8.wav" size="102444" crc="9f80fe09" sha1="d15710f5845fdac7f103c7224699f8671042ac3a"/>
        <rom name="ft_voi-9.wav" size="141356" crc="25b9e1eb" sha1="ac792f7bc557862796056813407488d4900adf61"/>
        <rom name="ft_voi-a.wav" size="109612" crc="bf623ab3" sha1="575f8cde0e0c0120bc623b2bb45658015e1a1d57"/>
        <rom name="ft_voi-b.wav" size="29740" crc="ba412c06" sha1="2796eeb864eca9d8afc6a2ae1d78322e42af49e6"/>
    </machine>

You see the difference?
Your Dat File has no roms information that can be collect.
Check your file or tell us there you have this.

Cheers

Hi,

the file: ps_MAME_Samples_20181216_(cm).dat is from http://www.progettosnaps.net/dats/ and is from MAME 0.204.
I dont know it is give a newer one, but then I make a full audit with MAME I have no errors and this is enough for me.

The file: fix_MAME_0.205.snd.dat is that i found in your DAT as samples and created this one for you.
The other Games that are in the list like nes_.... I dont know if this have realy external files with sound like *.wav!
The sample or sound tag in the xml file is only importand for mame how to be emulate that specific rom but has no rom
informations to collect for clrmamePro or other RomManagers.

Better you take the ps_MAME_Samples_20181216_(cm).dat put it in your samples directory in your DATRoot and let it
fix. MAME looks in the samples folder for that samples specific wave files.

Cheers

 I’m confused... I’ve already got fantasy.zip and vanguard.zip in my samples folder. It’s like clrmamepro is complaining that they’re not there but they are!

I’ve tried downloading the samples again but it still doesn’t “see them”. I’ve solved the problem with the NES samples, so I’ve only got 6 sets missing  

What exactly do I need to do to get clrmamepro to fix the errors? I don’t understand what I need to do with the progetto dat that you’ve attached??? I can trick clrmamepro by creating a “fantasy_sound” folder in the root sample directory, but that doesn’t seem right.

A screenshot would help, I think

Thread closed !!!