|
|
MucciAdministrator1155 posts
As usual because RR does not provide SL -> use my mirror https://mega.nz/#F!uQFXVIAQ!DKYMT2E-iqpTlMTI3edA_g
Use his thread for added SL/CHD stuff (from official 0.184 to the next official release 0.185)
Don't search/post here for stuff that is already added to 0.184 or earlier!
|
|
MucciAdministrator1155 posts |
|
|
|
new thingys spotted for SL in devsite (pull request)
adan y eva
|
|
|
|
|
|
Some CHDs were updated for NAOMI. Exists a way to updated those with chdman or I need to re-download all? |
|
Quote by Ashura-X
Some CHDs were updated for NAOMI. Exists a way to updated those with chdman or I need to re-download all?
You can try this: https://github.com/mamedev/mame/commit/cfa43e6ae554920d99f307a7959e2a656e3dfa70 (scroll down to comments area)
Follow the advice from p1pkin, not LnmVolbo. So far, I've tried one, gdt-0011, and it converted properly.
|
|
Here is a batch file to process these conversions.
They converted easily, except for radirgyo\gdl-0032. The problem with it seems to be that the first .bin file unpacked from the v4 CHD isn't correct. The correct .bin file compresses down pretty well, so I have included it in this distribution. The batch file will automatically replace the incorrect .bin file with the correct one.
This distribution contains the batch files and two command line utilities to truncate and byteswap files, plus the correct gdl-0032 first .bin file. Also included is the C# source code for trunc.exe and byteswap.exe (in the src folder). You don't need to compile them, they are only there for reference.
What you have to do to prep:
Place a copy of all the .chd files that need to be converted into a single folder and unpack the distribution (convert.7z) there as well. Also place a copy of chdman.exe into that folder. I used v0,184, but any recent version of chdman.exe ought to work.
Here is a list of the .chd files that can be converted:
cleoftp\gdl-0012.chd radirgyo\gdl-0032.chd (may be in the radirgy folder) monkeyba\gds-0008.chd lupinsho\gds-0018.chd initdv3jb\gds-0032b.chd (may be in the initdv3j folder) tfupdate\gdt-0011.chd avalon20\gdt-0017b.chd hotd3\gdx-0001.chd mj2\gdx-0006c.chd (may be in the mj2 folder) ghostsqu\gdx-0012a.chd gundamos\gdx-0013.chd outr2st\gdx-0014a.chd wangmid2j\gdx-0015.chd (may be in the wangmid2 folder) wangmid2\gdx-0016a.chd mj3d\gdx-0017d.chd (may be in the mj3 folder) scg06nt\gdx-0018a.chd
Run the doAll.bat batch file to convert everything. It will call the doOne.bat batch file for each conversion. If you don't want to convert everything at once, you can remove lines from the doAll.bat file. Each CHD file conversion will take a few minutes, spending most of the time compressing the new .chd file. The converted CHDs will appear in a subfolder named "new" under the folder you are working from. The SHA1: hash will appear for each .chd file as it completes. If the batch file finds the CHD it is about to process is already in the "new" folder, it will skip it. If the batch file does not find the specified .chd file, it will skip it. You can interrupt the batch file with Ctrl-C, but it might leave a partial CHD in the "new" folder, so you might have to delete that partial ,chd file afterwards. If you are in any doubt about the .chd files in the "new" folder, you can run the chdman "verify" command on them.
|
|
Thank you very much!
After about one hour and a half, the conversion is complete. Worked perfectly.
8.18 GB of source CHDs became 7.12 GB after conversion.
|
|
|
|
|
|
|
|
tandy radio shack super logo
Super Logo (1984) (26-2717) (Larry Kheriaty & George Gerhold).ccc
http://www.colorcomputerarchive.com/coco/Cartridges/
|
|
More dragon stuff
https://www.sendspace.com/file/e2p8nm
2mb
Miss 2
Data Retrieval System [folder: drs - size: 180kb] missing set: Data Retrieval System missing rom: DRS (1983)(Salamander Software)[!].vdk [size: 184332] [CRC32: 9885c686] [SHA1: 5d684c5d7359ee279ff9ceba2cfa9ca2f7732982]
Prolog Compiler [folder: prolog - size: 360kb] missing set: Prolog Compiler missing rom: Prolog (1988)(Metasoft)[OS-9][!].vdk [size: 368658] [CRC32: fa319c92] [SHA1: 755cb11a5e836ce2a775d1692ed5042d67ab8ff5]
|
|
MucciAdministrator1155 posts |
|
|
|
New phc-25_cass romset attached |
|
MucciAdministrator1155 posts |
|
GothicplsurMember28 posts
Missing Tokyocopi.chd
Anyone? Thanks!
|
|
Hi,
I need this sampler
N-Sub Oscillator 97271-P [folder: s97271p - sampleparent: nsub
Thank a lot...
Jorge
Rio de Janeiro Brazil
|
|
AnonymousUndefined0 posts @Gothicpisur, tokyocopi.chd is a rename of tokyocop.chd of the previous Mame version. Look in your rommanager's backup folder or you can download it HERE and rename the chd to tokyocopi.chd |
|
GothicplsurMember28 posts Thanks! Would it go in a separate folder called "tokyocopi" ? or keep it "tokyocop" folder? |
|
GothicplsurMember28 posts I renamed it tokyocopi.chd and ClrMamePro keeps yelling at me and saying it's missing... Hmmm... it put the tokyocop folder outside of the CHD folder. |
|
AnonymousUndefined0 posts You need to put it inside a tokyocopi folder that's inside your CHD/roms folder. |
|
Cn someone please fll this for me? |
|
Attn mandoju
The missing sample is here.
http://www.progettosnaps.net/samples/
|
|
Missing a few ROMs and SL items. Any help appreciated! |
|
AnonymousUndefined0 posts @rwood2477, attached is your missing rom. |
|
Thank you Perkele fot the fill. |
|
Can someone please fill this for me.
Missing 1 image yojusen2.chd for pc98_cd
|
|
slashguns04Member29 posts
i search this file
sp5001.bin sp5001-b.bin sp5002-a.bin
315-6215.bin
|
|
slashguns04Member29 posts
this rom search?
nsub : pr-02.a1 (256 bytes) - NOT FOUND (s97269pb) nsub : pr-56.b2 (1024 bytes) - NOT FOUND (s97269pb) nsub : pr-57.a3 (1024 bytes) - NOT FOUND (s97269pb)
|
|
I tracked down the missing pc98_cd image.
It can be found here.
mega:#F!N0wWjCwD!qIMN-t9GPkzRQF9egxmxHw
|
|
rickysnoozesMember6 posts
thanks to all of you !
you rock !
|
|
slashguns04Member29 posts
help
i search this rom
nsub : pr-02.a1 (256 bytes) - NOT FOUND (s97269pb) nsub : pr-56.b2 (1024 bytes) - NOT FOUND (s97269pb) nsub : pr-57.a3 (1024 bytes) - NOT FOUND (s97269pb)
|
|
slashguns04Member29 posts
i search
policet2 : pt2 - NOT FOUND
|
|
MucciAdministrator1155 posts don't post your request in two thread! (check the other) |
|